29FL1770 or 25FL1760 FL1 Repair Tips
Search: 29FL1770 or 25FL1760 FL1
Results 4
Results 4
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Philips | 29FL1770 or 25FL1760 FL1.0 | Lights flashing at the front, if carefully interpreted they point to the primary of the power supply | Replaced 2SB 3795B chopper transistor, heated the heatsink with a hair dryer and it started right up, weird as the transistor was reading fine | ||
Philips | 29FL1770 or 25FL1760 FL1 | When selecting a channel it locks in initially but will then go off tune as if the voltage tuning had varied | Replaced the TDA i.c. in the tuner i.f. section. tried the capacitors first of course. | ||
Philips | 29FL1770 or 25FL1760 FL1 | No pictures or sound | Disconnect the P1 and P2 plugs on the right hand side board. L.o.p.t. side. If the set now starts up then change all sound output IC's | ||
Philips | 29FL1770 or 25FL1760 FL1.0 | After replacing the line output transformer, the following sympton was displayed. Display flashing standby light and stereo II | Short s23 and s24 briefly, which will put the set into service mode. Option 1 should read 010 this applies only to the 25FL and 29FL. Option 2 should be 001 for sets with text and 004 for sets without text |